Installation instructions for the Lenovo Thinkpad X60 Tablet. ## Contents * [1 Pre installation notes](#Pre_installation_notes) * [2 Accessing the recovery partition with GRUB](#Accessing_the_recovery_partition_with_GRUB) * [3 Configuration](#Configuration) * [3.1 Graphics card](#Graphics_card) * [3.2 Stylus](#Stylus) * [3.3 Automatic rotation](#Automatic_rotation) * [3.4 TrackPoint scrolling (wheel emulation)](#TrackPoint_scrolling_.28wheel_emulation.29) * [4 ThinkFinger](#ThinkFinger) * [5 Backlight](#Backlight) * [6 Specifications](#Specifications) ## Pre installation notes Remember to back up the restore partition if you plan to restore to Microsoft Windows, or even leave it. As the laptop does not have a built-in CD/DVD drive you might have to use a USB stick or similar device. Look in this how to [install from USB stick](/index.php/Install_from_USB_stick "Install from USB stick") for more information. Follow the [Installation guide](/index.php/Installation_guide "Installation guide") ## Accessing the recovery partition with GRUB Edit your **/boot/grub/menu.lst** file and add the following: ``` # booting "Rescue and Recovery" partition from Lenovo title Thinkpad Maintenance unhide (hd0,0) rootnoverify (hd0,0) chainloader +1 ``` ## Configuration ### Graphics card See [Intel graphics](/index.php/Intel_graphics "Intel graphics"). ### Stylus You can get the stylus to work by installing [xf86-input-wacom](https://www.archlinux.org/packages/?name=xf86-input-wacom). Add the following sections to your **xorg.conf** if it doesn't work: ``` Section "ServerLayout" ... InputDevice "Cursor" "SendCoreEvents" InputDevice "Stylus" "SendCoreEvents" InputDevice "Eraser" "SendCoreEvents" ... EndSection Section "InputDevice" Identifier "Cursor" Driver "wacom" Option "Device" "/dev/ttyS0" Option "Type" "cursor" Option "ForceDevice" "ISDV4" Option "KeepShape" "on" Option "Mode" "Absolute" Option "BottomY" "18432" Option "BottomX" "24576" EndSection Section "InputDevice" Identifier "Stylus" Driver "wacom" Option "Device" "/dev/ttyS0" Option "Type" "stylus" Option "ForceDevice" "ISDV4" Option "KeepShape" "on" Option "TPCButton" "off" Option "BottomY" "18432" Option "BottomX" "24576" Option "Mode" "Absolute" EndSection Section "InputDevice" Identifier "Eraser" Driver "wacom" Option "Device" "/dev/ttyS0" Option "Type" "eraser" Option "ForceDevice" "ISDV4" Option "KeepShape" "on" Option "BottomY" "18432" Option "BottomX" "24576" EndSection ``` Also add the following if **X -configure** does not do it: ``` Section "Monitor" DisplaySize 245 18 ... EndSection ``` ### Automatic rotation Refer to [acpid](/index.php/Acpid "Acpid") on how to edit **handler.sh**. Now you should be able to grab events with **acpi_listen**. My tablet creates the following events when swivelling it down: ``` ibm/hotkey HKEY 00000080 00005009 ``` When swiveling up: ``` ibm/hotkey HKEY 00000080 0000500a ``` Now we can edit our **/etc/acpi/handler.sh** to grab these events when they occur. Add the following under **case "$1"** somewhere: ``` ibm/hotkey) case "$2" in HKEY) case "$4" in 00005009) #Swiveling down /bin/sh /etc/acpi/actions/swivel-down  ;; 0000500a) #Swiveling up /bin/sh /etc/acpi/actions/swivel-up  ;; esac  ;; esac  ;; ``` If you're using [HAL](/index.php/HAL "HAL") for configuring your Xorg you'll need to get the device names used by xsetwacom. If you're using the **xorg.conf** from above you can leave the device names as they are. ``` xsetwacom --list dev ``` Will give you something like this: ``` PnP Device (WACf008) eraser ERASER PnP Device (WACf008) touch TOUCH PnP Device (WACf008) STYLUS ``` You'll just need to cut off the all caps identifier at the end. So the device name for the eraser in the example above would be: ``` PnP Device (WACf008) eraser ``` Now create the files specified in **handler.sh**. **/etc/acpi/actions/swivel-down:** ``` #!/bin/bash /usr/bin/xrandr -o inverted xsetwacom set "Stylus" Rotate half xsetwacom set "Cursor" Rotate half xsetwacom set "Eraser" Rotate half ``` **/etc/acpi/actions/swivel-up:** ``` #!/bin/bash /usr/bin/xrandr -o normal xsetwacom set "Stylus" Rotate none xsetwacom set "Cursor" Rotate none xsetwacom set "Eraser" Rotate none ``` Make them executable: ``` chmod +x /etc/acpi/actions/swivel* ``` Now we only need to set up the rotate button, which can be done by finding out what X event it creates when it is pressed. You can use **xev** to find out: ``` xev | grep keycode ``` Now press the rotate button a couple of times and it should give you a keycode. The one for mine was 199. ``` state 0x0, keycode 199 (keysym 0x0, NoSymbol), same_screen YES ``` Create a file in your home directory called **.Xmodmap**, this file should contain: ``` keycode 199 = F19 ``` Before we go any further we have to put the following rotate script somewhere, it could be in your home directory, or maybe in **/usr/local/bin/**: ``` #!/bin/bash # This is a script that toggles rotation of the screen through xrandr, # and also toggles rotation of the stylus, eraser and cursor through xsetwacom # Check orientation orientation=`xrandr --verbose -q | grep LVDS | awk '{print $5}'` # Rotate the screen and stylus, eraser and cursor, according to your preferences. if [ "$orientation" = "normal" ]; then /usr/bin/xrandr -o right xsetwacom set "Stylus" Rotate cw xsetwacom set "Cursor" Rotate cw xsetwacom set "Eraser" Rotate cw elif [ "$orientation" = "inverted" ]; then /usr/bin/xrandr -o left xsetwacom set "Stylus" Rotate ccw xsetwacom set "Cursor" Rotate ccw xsetwacom set "Eraser" Rotate ccw elif [ "$orientation" = "right" ]; then /usr/bin/xrandr -o inverted xsetwacom set "Stylus" Rotate half xsetwacom set "Cursor" Rotate half xsetwacom set "Eraser" Rotate half elif [ "$orientation" = "left" ]; then /usr/bin/xrandr -o normal xsetwacom set "Stylus" Rotate none xsetwacom set "Cursor" Rotate none xsetwacom set "Eraser" Rotate none fi ``` Make the file executable with **chmod +x** and create a **.xbindkeysrc** file in your home directory, with the following content: ``` "/path/to/rotatescript" F19 ``` Run: ``` xmodmap ~/.Xmodmap xbindkeys /etc/rc.d/acpid restart ``` Now rotate button and when you swivel the screen down and up it should rotate. **Note:** You have to run: ``` xmodmap ~/.Xmodmap xbindkeys ``` Every time you start Xorg. You might also want to take a look at [this rotate script](http://luke.no-ip.org/x60tablet/examples/rotate) written by Luke ### TrackPoint scrolling (wheel emulation) See [TrackPoint](/index.php/TrackPoint "TrackPoint") ## ThinkFinger Works, read [ThinkFinger](/index.php/ThinkFinger "ThinkFinger") for reference and examples. ## Backlight To make backlight buttons turn the backlight turn up and down you can do the following. First edit **/etc/modprobe.d/modprobe.conf** to make the **thinkpad_acpi** module load with some special options: **/etc/modprobe.d/modprobe.conf:** ``` options thinkpad_acpi brightness_enable=1 hotkey=enable,0xffffff ``` Restart acpid and grab the events they key combinations make with **acpi_listen**: ``` /etc/rc.d/acpid restart acpi_listen ``` The backlight down button on my machine creates: ``` ibm/hotkey HKEY 00000080 00001010 ``` backlight up button creates: ``` ibm/hotkey HKEY 00000080 00001011 ``` Edit **/etc/acpi/handler.sh:** ``` ibm/hotkey) case "$2" in HKEY) case "$4" in 00001010) # backlight down # Check current state typeset -i state=`cat /sys/class/backlight/thinkpad_screen/brightness` # Subtract one from the current state and echo it to the file down=$((state-=1)) echo "$down" > /sys/class/backlight/thinkpad_screen/brightness  ;; 00001011) # backlight up # Check current state typeset -i state=`cat /sys/class/backlight/thinkpad_screen/brightness` # Add one to the current state and echo it to the file state+=1 echo "$state" > /sys/class/backlight/thinkpad_screen/brightness  ;; ``` Restart acpid: ``` /etc/rc.d/acpid restart ``` ## Specifications Specifications can be found here [on ThinkWiki](http://www.thinkwiki.org/wiki/Category:X60_Tablet) lspci ``` 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b4) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 09) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 18) ``` lsusb ``` Bus 005 Device 003: ID 0a5c:2110 Broadcom Corp. Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 005 Device 001: ID 1d6b:0001 Bus 004 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 001: ID 1d6b:0001 Bus 001 Device 001: ID 1d6b:0002 ```